Buying an EOT crane is easy to get wrong. Order too small and production bottlenecks; order too big and you pay for steel, power and building strength you will never use. Almost every good crane specification comes down to four numbers.
1. Capacity (safe working load)
Start with the heaviest single item you will lift, add the weight of slings, spreader beams or magnets, and allow sensible headroom for future products. Typical bands are 1 to 20T for single-girder cranes and up to 50T or more for double-girder cranes.
2. Span
Span is the distance between the centres of the two crane rails, not the building width. It is fixed by the building’s column grid, which is why crane and building should be designed together. Longer spans generally push you towards double-girder designs.
3. Duty class
A crane that lifts a few times a day is very different from one in a steel plant running three shifts. Duty classification (per IS 3177 / IS 807) considers how often the crane works and how close to full load it runs. Under-specifying duty is a common reason for premature wear of wheels, gearboxes and motors.
4. Height of lift and clearances
Height of lift sets the rail level, which in turn sets the building’s eave height. Clearances above the crane, at the ends and to the side must be checked against the building frame.
| Use case | Typical choice |
|---|---|
| Workshop, light assembly | Single-girder, 1 to 10T |
| General fabrication | Single or double-girder, 5 to 20T |
| Steel plant, foundry | Double-girder, 20 to 50T+ |
| Outdoor yard | Gantry / semi-gantry |
| Single workstation | Jib crane |
Controls and safety
VFD drives give smooth starts and precise positioning, reducing load swing and mechanical shock. Overload protection, limit switches, anti-collision devices and emergency stops should be standard.
Specify the crane and the building together, and most crane problems never happen.
Send us your four numbers and building details through our EOT crane page, and our engineers will size the crane and runway for you.